The Method of Hob Computation
2021-08-26 13:43:54
jiangxingTools
2429
The Method of Hob Computation
Normal pitch=Mn x Π(Mn: Normal Module)
Axial pitch=Mn/cos LA
Lead=Axial pitch x Number of start
LA(Lead Angle)=sin-1(Mn x Number of start/Hob PCD)
Cam amount(relief amount)=Hob OD x Π x tan(cam angle)/Hob NT
Cam angle: Generally PA20°-10°, 14.5°-12°,25°-9°
Groove Lead=Hob PCD x Π/tan LA
Flute depth= Total tooth height if a hob+ Cam amount+1.5mm
Hob's Relief Angle=tan-1(tan PA x tan Cam angle)
相關(guān)文章
- Heat-treatment Hardness Standard for Hobs
- ?PA30° PCD 25mm Shank Type Gear Shaper Cutter with Module m1~m3
- PA30° PCD 100mm Bowl Type Gear Shaper Cutter with Module m5~m10
- Timing Pulley Hob for G.T
- HSS M2, M35, ASP30, ASP52, S390 Module Spline Gear Hobs
- Spray Forming Material HSF825K, HSF835
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m1.25