Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2072
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
- PA20° Profile DIN3972 Standard Gear Hob with Module m3
- PA20° Pre-shave Gear Hobbing Cutter with Module m4.5
- Gear Hob for Chain Sprockets to DIN 8196
- Timing Pulley Hob for STS 14M
- PA20° PCD 240mm β5° Disk Type Conventional Gear Shaving Cutter with Module m2~m8
- STD Module Gear Hob Cutter with DIN3972 Tooth Profile
- PA20° DP11 Standard Hob with BPⅡ